SG2526N
| Parameters | |
|---|---|
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Weight | 1.270087g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 500kHz |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 18mA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~350kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG2526N Overview
With a 18-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. 2 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 8V~35V voltage are supplied and operated. Worked in a -25°C~85°C TA dc switcher before. This switching controller can switch at 1Hz~350kHz. The Through Hole value makes it suitable for general dc dc regulator. To provide efficient switching control, Dead Time Control, Enable, Frequency Control, Reset, Soft Start is included in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of 18 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. You can find other relevant dc to dc converter ics by searching "SG*526". Switching converter has a total of 18 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 8V. DC regulator outputs 5V voltage based on test statistics. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. Voltage regulator dc to dc is designed to operate at 49 % duty cycle during power-ups and power-downs to ensure reliability. Having a Through Hole makes DC switcher suitable for most application and prototype designs. 500kHz is the frequency of the switching controller. When the dc switching is dormant, it uses 18mA. A current of 18mA is supplied to it.
SG2526N Features
Transistor Driver Outputs
Switching Frequency: 1Hz~350kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG2526N Applications
There are a lot of Microchip Technology SG2526N DC to DC converter applications.
- CNC system
- Scientific testing
- Automatic plug-in machines
- Grinders
- Special machining machine tools
- Telecommunications equipment
- Experimental setup
- Computer-related products
- Adjustable voltage or current linear circuits
- Digital display device
