SG2846N
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Frequency | 500kHz |
| Base Part Number | SG*846 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Max Supply Current | 21mA |
| Quiescent Current | 17mA |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 8V |
| Topology | Buck, Boost, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1Hz~500kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 45 % |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG2846N Overview
It comes in a 16-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. For outputs of 2, this dc motor controller is suitable. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 8V~40V. Suitable for working in an dc switcher that has a -25°C~85°C TA. A switching controller such as this can switch at a value of 1Hz~500kHz . It is suitable for general dc dc regulator when it is set to Through Hole. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. Search for "SG*846" to find other relevant dc to dc converter ics. 16 pins are on switching converter. This dc dc voltage regulator should be powered by a voltage of 8V. It should be noted that the dc to dc regulator only accepts 40V voltage as input voltage. You should note that the dc dc regulator's usual output current is 100mA. The maximum duty cycle of this voltage regulator dc to dc is set to 45 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Through Hole. The switching controller works at a frequency of 500kHz. Dormant dc switchings use 17mA. The component might suffer damage if the current exceeds 21mA.
SG2846N Features
Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 500kHz
SG2846N Applications
There are a lot of Microchip Technology SG2846N DC to DC converter applications.
- Balance equipment
- Product testing
- Computer application technology
- Sensitive electronic devices
- Planers
- ATMs
- Packaging
- Experimental setup
- Power supplies of electronic gadgets
- Automation technology
