SG3524D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | SG3524 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 8mA |
| Control Features | Current Limit, Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45% |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SG3524D Overview
With its 16-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 8V~40V and has a 8V~40V supply voltage. Suitable for work in a 0°C~70°C TA dc switcher. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 20V. In addition to "SG3524", there are other relevant dc to dc converter ics you can find. 16 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. DC regulator outputs 5.4V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 45 % during power-up and power-down. Switching controllers work at 450kHz Hz. As long as the dc switching is in a dormant state, it utilizes 8mA. You can set the input voltage to 40V for nominal working status.
SG3524D Features
Transistor Driver Outputs
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 450kHz
SG3524D Applications
There are a lot of Texas Instruments SG3524D DC to DC converter applications.
- Surge protection circuits
- Analog precision reference circuits
- Alternators
- Radio equipment
- Low output voltage switching power supply circuits
- Gear/thread machining machines
- Various CNC machine tools
- Special machining machine tools
- Laboratories
- Printing
