SG3524D
| Parameters | |
|---|---|
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SG*524 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 17V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Max Supply Current | 10mA |
| Quiescent Current | 8mA |
| Control Features | Enable |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 400ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 200 ns |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 9.895mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG3524D Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. A solid enclosure of Tube surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8V~40V. Suitable for working in an dc switcher that has a 0°C~70°C TA. There is a switch at 100kHz~300kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Enable. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. 16 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 20V. SG*524 can be used to locate other relevant dc to dc converter ics. There are 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. 8V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 17V voltage according to the test statistics. The dc to dc regulator is limited to 40V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 50A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 49 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controllers operate at 400kHz frequencies. A dc switching in a dormant state uses 8mA. Components may be damaged if their current is greater than 10mA.
SG3524D Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 400kHz
SG3524D Applications
There are a lot of Microchip Technology SG3524D DC to DC converter applications.
- Laboratories
- Boring machines
- Telecommunications equipment
- Power supplies of electronic gadgets
- PSRR circuits
- Bending machines
- Direct power supply system
- Alternators
- Surge protection circuits
- Planers
