SG3524P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 300kHz |
| Base Part Number | SG3524 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Max Supply Current | 20mA |
| Quiescent Current | 8mA |
| Control Features | Enable |
| Topology | Flyback, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45% |
| Output Phases | 1 |
| Height | 1.65mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SG3524P Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC packaging is solid with a Tube enclosure. The program can handle Transistor Driver dc switching's outputs (s). A 8V~40V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a 0°C~70°C TA. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 20V is input. You can find other relevant dc to dc converter ics by searching "SG3524". The switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 40V. You should note down the dc dc regulator's usual output current of 100mA when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 300kHz frequency setting on the switching controller. When the dc switching is dormant, it uses 8mA. You can set the input voltage to 40V for nominal working status. If the current exceeds 20mA, the component may not operate correctly and may even be damaged.
SG3524P Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
SG3524P Applications
There are a lot of STMicroelectronics SG3524P DC to DC converter applications.
- seismic instrument power circuits
- Adjustable voltage or current linear circuits
- Pipe bending machines
- Driver circuits
- Linear guide
- Low output voltage switching power supply circuits
- Electrical power transmission
- Constant current circuits
- Hydro power
- Power supplies of electronic gadgets
