SG3525ADW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SG3525A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 1mA |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Frequency | 400kHz |
| Max Duty Cycle | 49 % |
| Output Phases | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
SG3525ADW Overview
As a result of 16-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8V~35V and has a 8V~35V supply voltage. Worked in a 0°C~70°C TA dc switcher before. With this switching controller, you can switch at 100Hz~400kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. 16 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 20V. In addition to "SG3525A", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 8V is the minimum required for the dc dc voltage regulator. Voltages 35V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 400mA, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 49 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator's maximum frequency is 400kHz. DC switching uses 1mA when it is dormant.
SG3525ADW Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
SG3525ADW Applications
There are a lot of ON Semiconductor SG3525ADW DC to DC converter applications.
- Electric heating, lighting
- Special machining machine tools
- Various precision measuring detectors
- Radio equipment
- Hydrogen power
- Series voltage regulation circuits
- Balance equipment
- CNC system
- Linear guide
- Boring machines
