SG3525AP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Tolerance | 1% |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SG3525 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Max Supply Current | 20mA |
| Quiescent Current | 1mA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Reference Voltage | 5.1V |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 49 % |
| Output Phases | 1 |
| Height | 1.6mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SG3525AP Description
When employed in the design of all types of switching power supplies, the SG3525AP is a regulating pulse width modulator IC that is designed to deliver increased performance and reduced exterior parts count. The on-chip 5.1V reference is cut to 1%, and the error amplifier's input common-mode range covers the reference voltage, removing the need for additional resistors. Multiple units can be slaved or synchronized to an external system clock using a synchronized input to the oscillator. Between the CT and the discharge terminals, a single resistor allows for a wide range of dead time adjustment. This gadget also includes soft-start circuitry, requiring only an external timing capacitor. With pulsed shutdown, a shutdown terminal controls both the soft-start circuitry and the output stages, allowing for fast turn-off via the PWM latch as well as soft-start recycle with longer shutdown orders. SG3525AP applications are as follows:
SG3525AP Features
Internal soft-start
8 to 35 V oepration
Pulse-by-pulse shutdown
Adjustable deadtime control
Dual source/sink output drivers
Separate oscillator sync terminal
5.1 V reference trimmed to ± 1 %
100 Hz to 500 KHz oscillator range
Latching PWM to prevent multiple pulses
Input undervoltage lockout with hysteresis
SG3525AP Applications
Power management
When employed in the design of all types of switching power supplies, the SG3525AP is a regulating pulse width modulator IC that is designed to deliver increased performance and reduced exterior parts count. The on-chip 5.1V reference is cut to 1%, and the error amplifier's input common-mode range covers the reference voltage, removing the need for additional resistors. Multiple units can be slaved or synchronized to an external system clock using a synchronized input to the oscillator. Between the CT and the discharge terminals, a single resistor allows for a wide range of dead time adjustment. This gadget also includes soft-start circuitry, requiring only an external timing capacitor. With pulsed shutdown, a shutdown terminal controls both the soft-start circuitry and the output stages, allowing for fast turn-off via the PWM latch as well as soft-start recycle with longer shutdown orders. SG3525AP applications are as follows:
SG3525AP Features
Internal soft-start
8 to 35 V oepration
Pulse-by-pulse shutdown
Adjustable deadtime control
Dual source/sink output drivers
Separate oscillator sync terminal
5.1 V reference trimmed to ± 1 %
100 Hz to 500 KHz oscillator range
Latching PWM to prevent multiple pulses
Input undervoltage lockout with hysteresis
SG3525AP Applications
Power management
