SG3526BDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~500kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG3526BDW Overview
As a result of 18-SOIC (0.295, 7.50mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 2 output generation. There are Transistor Driver dc switching's output (s) that it can handle. A 8V~35V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a 0°C~70°C TA. This switching controller can switch at 1Hz~500kHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Enable, Frequency Control, Reset, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. An array of 18 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "SG*526". There are 18 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 8V. Voltages 35V are the maximum that the dc to dc regulator will accept. The dc dc regulator's usual output current is 100A, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 49 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. A frequency of 500kHz is used by the switching controller. DC switchings that are dormant use 18mA.
SG3526BDW Features
Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG3526BDW Applications
There are a lot of Microchip Technology SG3526BDW DC to DC converter applications.
- Nuclear power plants
- Injection molding machinery
- Milling machines
- Production lines
- Adjustable voltage or current linear circuits
- Electrical power transmission
- Wide-range voltage regulation circuits
- Access control systems
- Pipe bending machines
- Network technology
