SG3526BN
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 500kHz |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 18mA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.270087g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
SG3526BN Overview
It comes in the 18-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. 2 outputs can be generated with the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8V~35V. A 0°C~70°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 1Hz~500kHz . The Through Hole value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Enable, Frequency Control, Reset, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 18 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Other relevant dc to dc converter ics can be found by searching "SG*526". Total pins of switching converter are 16. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 8V. DC regulator outputs 5V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. A duty cycle set at 49 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Through Hole makes DC switcher suitable for most application and prototype designs. Switching controllers operate at 500kHz frequencies. Dormant dc switchings use 18mA. A current of 18mA is supplied to it.
SG3526BN Features
Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG3526BN Applications
There are a lot of Microchip Technology SG3526BN DC to DC converter applications.
- Hydraulic presses
- Drilling machines
- Imported equipment
- Experimental setup
- Electric water heaters
- Series voltage regulation circuits
- Medical monitoring systems
- Flaw detection equipment
- Domestic water pumps
- Surface processing equipment
