SI1004-E-GM2R
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 42-VFLGA Exposed Pad |
| Number of Pins | 42 |
| Supplier Device Package | 42-LGA (5x7) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | TxRx + MCU |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.8V~3.6V |
| Frequency | 240MHz~960MHz |
| Interface | I2C, SPI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 64kB Flash 4.35kB RAM |
| RAM Size | 4.3kB |
| Memory Type | FLASH |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Bandwidth | 620 kHz |
| Number of Timers/Counters | 4 |
| Protocol | EZRadioPro |
| Core Architecture | 8051 |
| Max Frequency | 25MHz |
| Number of Programmable I/O | 19 |
| Power - Output | 13dBm |
| RF Family/Standard | General ISM < 1GHz |
| Sensitivity | -121dBm |
| Data Rate (Max) | 256kbps |
| Serial Interfaces | I2C, SPI, UART |
| Current - Receiving | 18.5mA |
| Current - Transmitting | 17mA~30mA |
| Modulation | FSK, GFSK, OOK |
| Sensitivity (dBm) | -121 dBm |
| Number of GPIO | 19 |
| GPIO | 19 |
| RoHS Status | RoHS Compliant |
SI1004-E-GM2R Overview
To save space on the board, RF transceiver IC has a 42-VFLGA Exposed Pad package. Surface Mount is used for RF transceiver's mounting.The system emerges as a TxRx + MCU with transceiver RF's high efficiency.Advanced transceiver RF' packaging Tape & Reel (TR) is used to provide high reliability.With 42 pins, the transceiver RF circuit board is designed.Normally, the supply voltage (Vsup) for this RF transceiver should not be lower than 900mV.Based on the frequency of 240MHz~960MHz, RF transceiver operates .
SI1004-E-GM2R Features
42-VFLGA Exposed Pad package
Surface Mount for mounting
TxRx + MCU
Tape & Reel (TR) is used
42 pins
900mV volts
SI1004-E-GM2R Applications
There are a lot of Silicon Labs SI1004-E-GM2R RF Transceiver ICs applications.
- Health and Fitness
- Smart Meters
- Health care
- Medical
- HVAC
- M2M Communication
- Fitness
- Low-power IoT applications
- Remote Device Management
