Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-563, SOT-666 |
Number of Pins |
6 |
Weight |
32.006612mg |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
JESD-609 Code |
e3 |
Feature |
Slew Rate Controlled |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
625MOhm |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
174mW |
Terminal Position |
DUAL |
Terminal Form |
FLAT |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
SI1040 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Supply Voltage-Max (Vsup) |
8V |
Number of Channels |
2 |
Interface |
On/Off |
Output Configuration |
High Side |
Power Dissipation |
174mW |
Switch Type |
General Purpose |
Output Current-Max |
8A |
Drain to Source Voltage (Vdss) |
8V |
Nominal Input Voltage |
8V |
Continuous Drain Current (ID) |
430mA |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~8V |
Driver Number of Bits |
1 |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
500m Ω |
Drain to Source Resistance |
500mOhm |
Built-in Protections |
TRANSIENT |
Output Current Flow Direction |
SOURCE SINK |
Height |
600μm |
Length |
1.7mm |
Width |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SI1040X-T1-GE3 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a SOT-563, SOT-666 package that includes it.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -55°C~150°C TJ for reliable performance.By default, it is set to output 1.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Features of the lighting driver are Slew Rate Controlled.The SI1040 family consists of this type.A total of 6 terminations have been recorded.It is necessary to use the 6 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.High efficiency is possible at 2.5V supply voltage.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 6 pins.Lighting drivers with 625MOhm resistance are used.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.A maximum supply voltage of 8V is set in Vsup.The total number of channels is 2.
SI1040X-T1-GE3 Features
Supplied from 2.5V
Resistance of 625MOhm
2 channels
SI1040X-T1-GE3 Applications
There are a lot of Vishay Siliconix SI1040X-T1-GE3 Power Switches ICs applications.
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Hot Swaps
- Low Voltage I/O System Power
- Notebook PC
- Portable/Handheld Devices
- Hot-Swap Systems
- USB Power Distribution
- Solid-State Drives
- Gaming