SI1865DL-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 215mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 400mW |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Current Rating | 1.2A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI1865 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Number of Elements | 2 |
| Interface | On/Off |
| Element Configuration | Dual |
| Output Configuration | High Side |
| Power Dissipation | 400mW |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 8V |
| Nominal Input Voltage | 8V |
| Continuous Drain Current (ID) | 1.2A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 1.8V |
| Voltage - Load | 1.8V~8V |
| Driver Number of Bits | 1 |
| Dual Supply Voltage | 8V |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 180m Ω |
| Drain to Source Resistance | 215mOhm |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE SINK |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI1865DL-T1-E3 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 6-TSSOP, SC-88, SOT-363.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.It is recommended to set the temperature to -55°C~150°C TJ in order to ensure reliable operation.The LED driver is equipped with 1 outputs.A maximum voltage of P-Channel volts is available from the output of this LED driver.Slew Rate Controlled features are available on the lighting driver.It is a member of the SI1865 family.It has a total of 6 terminations.The 6 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.It is necessary to reduce the maximum output current to 1.2A to meet the operation criteria.Using a voltage of 2.5V allows for high efficiency.The lighting driver is mounted in the direction of Surface Mount.The LED driver has a total of 6 pins.Lighting drivers with 215mOhm resistance are used.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It is worth noting that there are a total of 2 elements.
SI1865DL-T1-E3 Features
Supplied from 2.5V
Resistance of 215mOhm
SI1865DL-T1-E3 Applications
There are a lot of Vishay Siliconix SI1865DL-T1-E3 Power Switches ICs applications.
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- Portable GPS
- Portable Devices
- USB Power Distribution
- PC Card Hot Swap
- Mobile Communication Devices
- PDAs
- Handheld Devices
- Hard Disk Drives
