SI3460-E02-GM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 11 |
| Weight | 24.097095mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| ECCN Code | EAR99 |
| Type | Controller (PSE), DC/DC |
| Max Power Dissipation | 15.4W |
| Voltage - Supply | 11V~16V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 11 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Internal Switch(s) | No |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | Yes |
| Height | 830μm |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
SI3460-E02-GM Overview
Embedded in the Tube package, it is used by many applications.In this case, it is packaged in the same way as 10-VFDFN Exposed Pad.PoE controller type Controller (PSE), DC/DC.There is an increase in the number of channels strong/weak as follows: 1.In order to ensure PoE reliability, it is designed to operate at a temperature of -40°C~85°C.In this electrical Po E controller, the voltage of the supply is 11V~16V.It is possible to terminate a transmission line with a 11 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.As you can see from the image, it is equipped with 11 pin count.11 pins are used in the design of this board.3.3V should be greater than the supply voltage.Upon reaching 3.6V for its operation, the maximal current (Vsup) required for its operation is reached.This PoE ethernet controller is mounted in such a way that it faces Surface Mount.As the current required for its operation (Vsup) reaches 2.7V, the PoE ethernet controller is operating.
SI3460-E02-GM Features
Tube package
11 pin count
11 pins
SI3460-E02-GM Applications
There are a lot of Silicon Labs SI3460-E02-GM Power Over Ethernet (PoE) Controllers applications.
- Higher Power Ethernet Powered Devices
- IP Phone Power Management
- High Temperature Industrial Applications
- Single-Port PSE End-Point Applications
- Power Modules
- Non-Compliant, Application Specific Devices
- Internet Appliances
- Dual Signature PD/Forced UPOE
- PoE powered device appliances
- Industrial Automation Equipment
