banner_page

SI3861BDV-T1-E3

P-Channel PMIC SI3861 6 Pin SOT-23-6 Thin, TSOT-23-6


  • Manufacturer: Vishay Siliconix
  • Nocochips NO: 880-SI3861BDV-T1-E3
  • Package: SOT-23-6 Thin, TSOT-23-6
  • Datasheet: PDF
  • Stock: 239
  • Description: P-Channel PMIC SI3861 6 Pin SOT-23-6 Thin, TSOT-23-6 (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6 Thin, TSOT-23-6
Number of Pins 6
Supplier Device Package 6-TSOP
Operating Temperature -55°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2011
Feature Slew Rate Controlled
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 115mOhm
Max Operating Temperature 150°C
Min Operating Temperature -55°C
Max Power Dissipation 830mW
Current Rating 2.3A
Base Part Number SI3861
Number of Outputs 1
Output Type P-Channel
Max Output Current 2.3A
Operating Supply Voltage 20V
Interface On/Off
Current - Output (Max) 2.3A
Output Configuration High Side
Power Dissipation 830mW
Output Current 2.3A
Switch Type General Purpose
Min Input Voltage 4.5V
Max Input Voltage 20V
Drain to Source Voltage (Vdss) 20V
Continuous Drain Current (ID) 2.3A
Ratio - Input:Output 1:1
Voltage - Load 4.5V~20V
Rds On (Typ) 60mOhm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SI3861BDV-T1-E3 Overview


The package is in the form of a Tape & Reel (TR).There is a package for it in the SOT-23-6 Thin, TSOT-23-6 package.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -55°C~150°C TJ.The LED driver is equipped with 1 outputs.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Features of the lighting driver are Slew Rate Controlled.It is part of the SI3861 family of LED drivers.For operation, 6 pins are used.The lighting driver's maximum output is 2.3AV.The maximum output current is reduced to 2.3A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.115mOhm resistance is present in the lighting driver.The output current is set to 2.3A in this case.In order to achieve the best efficiency, the supply voltage should be set to 20V.The maximum input voltage of the LED driver is 20V volts.As a minimum input voltage, it requires 4.5V volts.Stable operation is possible with a maximum operating temperature of 150°C°C.To ensure reliability, the system operates at a minimum temperature of -55°C degrees Celsius.

SI3861BDV-T1-E3 Features


Resistance of 115mOhm

SI3861BDV-T1-E3 Applications


There are a lot of Vishay Siliconix SI3861BDV-T1-E3 Power Switches ICs applications.

  • Gaming
  • Telecom and Network Systems
  • PC Cards
  • Set-top-box
  • PDAs
  • Portable GPS
  • Wireless/Networking Cards
  • Hot-Swap Systems
  • USB Power Distribution
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good