SI3865BDV-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 175mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 830mW |
| Technology | MOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Current Rating | 2.9A |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI3865 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 8V |
| Interface | On/Off |
| Element Configuration | Dual |
| Output Configuration | High Side |
| Power Dissipation | 830mW |
| Output Current | 2.9A |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 8V |
| Continuous Drain Current (ID) | 2.9A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~8V |
| Driver Number of Bits | 1 |
| Drain to Source Breakdown Voltage | 8V |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 45m Ω |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | TRANSIENT |
| Height | 990.6μm |
| Length | 3.0988mm |
| Width | 1.7018mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI3865BDV-T1-E3 Overview
The package is in the form of a Tape & Reel (TR).It's included in the SOT-23-6 Thin, TSOT-23-6 package.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.Keeping the temperature at -55°C~150°C TJ ensures reliable operation.As a default, the output is set to 1.A maximum output voltage of P-Channel volts has been specified.Currently, the LED driving board is equipped with Slew Rate Controlled features.There is a SI3865 family of things that it belongs to.A total of 6 terminations have been recorded.The 6 pins are used for the operation of the system.It consists of 1 functions.High efficiency is possible at 2.5V supply voltage.It is positioned in the direction of Surface Mount.It is equipped with a total of 6 pins.175mOhm is the resistance of the lighting driver.This case has the output current set to 2.9A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this LED driver, the maximum supply voltage is configured to be 8V (Vsup).There are a total of 2 elements.
SI3865BDV-T1-E3 Features
Supplied from 2.5V
Resistance of 175mOhm
SI3865BDV-T1-E3 Applications
There are a lot of Vishay Siliconix SI3865BDV-T1-E3 Power Switches ICs applications.
- Portable GPS Device
- Set-Top Boxes
- Portable GPS
- Hot-Swap Systems
- Telecom and Network Systems
- Gaming
- Hard Disk Drives
- Hot Swap
- HDD and SSD
- Solid State Drivers
