Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 Thin, TSOT-23-6 |
Number of Pins |
6 |
Weight |
19.986414mg |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
TrenchFET® |
Feature |
Slew Rate Controlled |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Resistance |
165mOhm |
Max Power Dissipation |
830mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.95mm |
Current Rating |
2.8A |
Base Part Number |
SI3865D |
Pin Count |
5 |
JESD-30 Code |
R-PDSO-G5 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
2.8A |
Interface |
On/Off |
Max Supply Voltage |
12V |
Min Supply Voltage |
1.5V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Output Configuration |
High Side |
Power Dissipation |
830mW |
Output Current |
1A |
Switch Type |
General Purpose |
Nominal Input Voltage |
12V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.5V~12V |
Rds On (Typ) |
45m Ω |
Height |
1mm |
Length |
3.1mm |
Width |
1.7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SI3865DDV-T1-GE3 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in SOT-23-6 Thin, TSOT-23-6.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -55°C~150°C TJ.In this LED driver, there are no outputs available.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It is equipped with Slew Rate Controlled features.It belongs to the family SI3865D.It contains 5 terminations.The 6 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.It is necessary to reduce the maximum output current to 2.8A to meet the operation criteria.Using a voltage of 1.8V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 5 pins are included in this LED driver.Currently, the LED driving board has a resistance of 165mOhm ohms.It is part of the TrenchFET? series.This results in a 1A output current.This LED driving board uses an analog IC ANALOG CIRCUIT.It can handle a maximum voltage of 12VV.It can work with as low a supply voltage as feasible, such as 1.5VV.
SI3865DDV-T1-GE3 Features
Supplied from 1.8V
Resistance of 165mOhm
SI3865DDV-T1-GE3 Applications
There are a lot of Vishay Siliconix SI3865DDV-T1-GE3 Power Switches ICs applications.
- Portable Video Game Players
- Smart Phones, Feature Phones
- Solid State Drivers
- Hot Swap
- Hard Disk Drives
- Gaming
- HDD and SSD
- Set-Top Boxes
- Notebook and Tablet Computers
- PDAs