banner_page

SI4123-D-GT

3V Frequency Synthesizer 1.8GHz SI4123 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 2.7V~3.6V Tube


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SI4123-D-GT
  • Package: 24-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 340
  • Description: 3V Frequency Synthesizer 1.8GHz SI4123 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 2.7V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 24
Weight 87.656726mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 1997
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
Type Frequency Synthesizer
Terminal Finish Silver (Ag)
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Frequency 26MHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number SI4123
Output Clock
Pin Count 24
Operating Supply Voltage 3V
Number of Elements 3
Supply Voltage-Min (Vsup) 2.7V
Number of Circuits 1
Nominal Supply Current 27mA
Frequency (Max) 1.8GHz
Input Crystal
Ratio - Input:Output 1:2
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 7.8mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SI4123-D-GT Overview


This clock IC is packaged using the Tube method. The 24-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 24 terminations can be found in frequency generators. Clock generator ics require a voltage of 3V. Crystal is designed as this clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. RF synthesizers based on this clock provide frequencies up to 1.8GHz maximum. Surface Mount-slots make it easy to mount this electronic component on panels. For safety reasons, this frequency synthesizer should have a voltage supply above 2.7V. Clock generators should operate with the voltage supply of 2.7V~3.6V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The RF synthesizer is compatible with Clock logic levels. As far as electrical parts go, this component can be classified as a Frequency Synthesizer component. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number SI4123 can be found below. A 24 pin is available on the PLL. The maximum supply voltage that clock generator can handle is 3V. Using a frequency of 26MHz allows frequency synthesizer to achieve high efficiencies. In this case, we have a 3-element clock PLL that performs well in the absence of jitter.

SI4123-D-GT Features


Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V

SI4123-D-GT Applications


There are a lot of Silicon Labs SI4123-D-GT Clock Generators applications.

  • Walkie-talkies
  • MRI
  • Wide area power system
  • Televisions
  • Cable television converter boxes
  • Digital circuits
  • Cellular/4G
  • PCI express cards
  • Electronic countermeasures
  • Phase modulation cellular systems

Write a review

Note: HTML is not translated!
    Bad           Good