SI4133-D-GM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 63.58798mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2017 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Frequency Synthesizer |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 26MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI4133 |
| Output | Clock |
| Pin Count | 28 |
| Operating Supply Voltage | 3V |
| Number of Elements | 3 |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Nominal Supply Current | 27mA |
| Frequency (Max) | 1.8GHz |
| Input | Crystal |
| Ratio - Input:Output | 1:3 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SI4133-D-GM Overview
As a clock IC, it uses the Tray package. A Clock PLL is included with the 28-VFQFN Exposed Pad package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains a total of 28 terminations within RF synthesizer. Clock generator ics require a voltage of 3V. This Clock PLL will be fed by Crystal as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. An upper frequency limit of 1.8GHz Max can be achieved with this clock-based frequency synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. There should be 2.7V~3.6V provided with this RF synthesizer. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. As far as electrical parts go, this component can be classified as a Frequency Synthesizer component. It is a 28-bit clock PLL designed specifically for microprocessors. According to the base part number, its related parts can be founded. There are 28 pins on the frequency generators that are available for use. Clock PLL is capable of handling a voltage of 3V. At a frequency of 26MHz, the system can achieve high efficiency. In this case, we have a 3-element clock PLL that performs well in the absence of jitter.
SI4133-D-GM Features
Available in the 28-VFQFN Exposed Pad
Supply voltage of 3V
Operating supply voltage of 3V
SI4133-D-GM Applications
There are a lot of Silicon Labs SI4133-D-GM Clock Generators applications.
- Wireless handsets
- Ports
- Integrated phase noise in aerospace systems
- Bit synchronization
- High-frequency induction heating
- Closed circuit systems
- Mixed mode (analog and digital) applications
- Aerospace and defense
- Wireless base station for LTE, LTE-advanced
- Signal modulation and demodulation
