banner_page

SI4133-D-GT

3V Frequency Synthesizer 1.8GHz SI4133 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 2.7V~3.6V Tube


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SI4133-D-GT
  • Package: 24-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 855
  • Description: 3V Frequency Synthesizer 1.8GHz SI4133 Clock Generators 24 Pins 24-TSSOP (0.173, 4.40mm Width) 24 Terminals Surface Mount 2.7V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 24
Weight 87.656726mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2017
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
Type Frequency Synthesizer
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Frequency 26MHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number SI4133
Output Clock
Pin Count 24
Operating Supply Voltage 3V
Number of Elements 3
Supply Voltage-Min (Vsup) 2.7V
Number of Circuits 1
Nominal Supply Current 27mA
Frequency (Max) 1.8GHz
Input Crystal
Ratio - Input:Output 1:3
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height 1.05mm
Length 7.8mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SI4133-D-GT Overview


The Tube method is used for packaging clock ICs. This clock generator is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains a total of 24 terminations within RF synthesizer. To operate this time clock generator, 3V voltage should be applied. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. An upper frequency limit of 1.8GHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.7V. Clock generator ic works with 2.7V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. There are several logic levels in Clock logic that can be used with this clock generator. A Frequency Synthesizer is a classification for the electronic part in question. It is a 24-bit clock PLL designed specifically for microprocessors. The related electrical components for the base part number SI4133 can be found below. It is possible to connect to the frequency generators via 24 pins. RF synthesizers can handle a voltage of 3V as the supply voltage. It is able to realize high efficiency when operating at a frequency of 26MHz. I would like to briefly introduce you to a 3-element frequency synthesizer that performs well with low jitter.

SI4133-D-GT Features


Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V

SI4133-D-GT Applications


There are a lot of Silicon Labs SI4133-D-GT Clock Generators applications.

  • Cell phones
  • Skew suppression
  • Wide area power system
  • Walkie-talkies
  • Cellular/4G
  • Clock generation systems
  • Vector network analyzers (VNA)
  • Frequency synthesis
  • Myriad digital applications
  • Radio receivers

Write a review

Note: HTML is not translated!
    Bad           Good