SI4724CY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI4724 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 500μA |
| Current - Output (Max) | 5.1A 6.5A |
| Output Configuration | High Side or Low Side |
| Power Dissipation | 1.2W |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 56 ns |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | UVLO |
| Rds On (Typ) | 24m Ω, 30m Ω |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SI4724CY-T1-E3 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package 16-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 2 outputs.The maximum output voltage is N-Channel volts.It comes under the family of SI4724.A total of 16 terminations can be found in it.The 16 pins are used to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This lighting driver is capable of delivering a maximum output of 5.1A 6.5A volts.This operation requires the maximum output current to be decreased to 6.5A.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.This LED driver is equipped with a total of 16 pins.It can handle a voltage of 5.5VV as its maximum supply voltage.It is also capable of running at 4.5V volts if necessary.
SI4724CY-T1-E3 Features
Supplied from 5V
SI4724CY-T1-E3 Applications
There are a lot of Vishay Siliconix SI4724CY-T1-E3 Power Switches ICs applications.
- Portable Video Game Players
- HDD and SSD
- Solid State Drivers
- Portable/Handheld Devices
- Portable GPS
- USB Power Distribution
- Notebook PC
- Hard Disk Drives
- Hot Swap
- Hot Swap
