Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-WFDFN Exposed Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Technology |
CMOS |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
SI52111 |
Output |
HCSL |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Operating Supply Current |
13mA |
uPs/uCs/Peripheral ICs Type |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
Frequency (Max) |
100MHz |
Input |
Clock, Crystal |
Ratio - Input:Output |
1:1 |
Primary Clock/Crystal Frequency-Nom |
25MHz |
PLL |
Yes |
Differential - Input:Output |
No/Yes |
Max Duty Cycle |
55 % |
Main Purpose |
PCI Express (PCIe) |
Height Seated (Max) |
0.8mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
RoHS Compliant |
SI52111-B6-GM2R Overview
The package Tape & Reel (TR) includes it. There is a 10-WFDFN Exposed Pad-serial number on the packaging of this product that identifies it as being packaged in a case. Clock program is recommended to mount Surface Mount on the wall. 10 terminations are present in it. Voltage is provided by the part at 3.3V. To run NOT SPECIFIED, we use the peak reflow temperature of this part. CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs are present in this device. On the device, there are 1. normaloperation has a maximum frequency of 100MHz. Temperatures can be varied in the operating range of -40°C~85°C. The component can provide a voltage of 2.97V~3.63V. The main purpose of the component is PCI Express (PCIe). The output is set to HCSL. A total of 2012 parts have been published. You need to start at SI52111 to find information about a part. A Surface Mount mounting is recommended. 10 pins are on the device. The supply voltage should be kept at 3.3V. Supply current is available at 13mA.
SI52111-B6-GM2R Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): NOT SPECIFIED
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, PROCESSOR SPECIFIC
Include 1 Circuits
run the output at th range of HCSL
with 10 Pins
operate supply voltage at the range of 3.3V
SI52111-B6-GM2R Applications
There are a lot of Silicon Labs SI52111-B6-GM2R application specific timer?applications.
- Audio/video equipment, gaming
- MSAN/DSLAM/PON
- Network Attached Storage
- Processor and FPGA clocking
- Test and Measurement
- Wireless Infrastructure
- Ethernet switch/router
- Wireless Access Point
- Broadcast video/audio timing
- Test and Measurement