SI52142-A01AGMR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SI52142 |
| Output | HCSL |
| Pin Count | 24 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 40mA |
| Frequency (Max) | 200MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:3 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Max Duty Cycle | 55 % |
| Main Purpose | PCI Express (PCIe) |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
SI52142-A01AGMR Overview
The package Tape & Reel (TR) contains it. In a 24-WFQFN Exposed Pad-shaped case, it comes. Clock program is recommended to mount using type Surface Mount. As far as terminations are concerned, there are 24. The part provides a voltage of 3.3V volts. In order to run NOT SPECIFIED, the peak reflow temperature of this part is taken into account. As of right 1w, the device has 1. There is a maximum frequency for normaloperation of 200MHz. The operating temperature range of -40°C~85°C can be varied. There is 3.135V~3.465V voltage limitation on the component. It can supply a voltage of 3.135V~3.465V. There is only one purpose for this component, PCI Express (PCIe). A value of HCSL is intended as an output. A total of 1997 publications have been made of the part. In order to search for information, you will use the base part number SI52142. There are 24 pins on this device. A total of 24 pins are included. 3.3V is the recommended supply voltage. In the family Clock Drivers, the device belongs. There is the ability to maintain 3 outputs on the device. This device uses a type PLL BASED CLOCK DRIVER logic IC. The supply current for this DAC is characterized as 40mA.
SI52142-A01AGMR Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): NOT SPECIFIED
Include 1 Circuits
run the output at th range of HCSL
with 24 Pins
operate supply voltage at the range of 3.3V
Logic IC Type: PLL BASED CLOCK DRIVER
SI52142-A01AGMR Applications
There are a lot of Silicon Labs SI52142-A01AGMR application specific timer?applications.
- Carrier Ethernet switches
- Print Imaging
- Networking/communication
- Network Attached Storage
- DU (Distribution Unit)
- BBU (Baseband Unit)
- Broadcast video/audio timing
- Ethernet Switches, Routers
- Printers, scanners, projectors
- Audio/video equipment, gaming
