banner_page

SI5316-C-GM

1.8V Clock Jitter Attenuator 710MHz SI5316 Clock Generators DSPLL? Series 36 Pins 36-VFQFN Exposed Pad 36 Terminals Surface Mount 1.71V~3.63V Tray


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SI5316-C-GM
  • Package: 36-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 506
  • Description: 1.8V Clock Jitter Attenuator 710MHz SI5316 Clock Generators DSPLL? Series 36 Pins 36-VFQFN Exposed Pad 36 Terminals Surface Mount 1.71V~3.63V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 36-VFQFN Exposed Pad
Surface Mount YES
Number of Pins 36
Weight 92.589543mg
Operating Temperature -40°C~85°C
Packaging Tray
Published 1997
Series DSPLL®
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 36
Type Clock Jitter Attenuator
Applications SONET;SDH
Voltage - Supply 1.71V~3.63V
Terminal Position QUAD
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Base Part Number SI5316
Output CML, LVCMOS, LVDS, LVPECL
Pin Count 36
Operating Supply Voltage 3.3V
Number of Circuits 1
Frequency (Max) 710MHz
Input Clock, Crystal
Ratio - Input:Output 3:1
PLL Yes with Bypass
Differential - Input:Output Yes/Yes
Divider/Multiplier Yes/No
Height Seated (Max) 0.9mm
Length 6mm
Width 6mm
Radiation Hardening No
RoHS Status RoHS Compliant

SI5316-C-GM Overview


The Tray method is used for packaging clock ICs. A Clock PLL is included with the 36-VFQFN Exposed Pad package. As a result of this, we can find 36 terminations. For this clock generator ic, a voltage of 1.8V is required. It is designed that the Clock PLL's input should be Clock, Crystal. Using 1 circuits, the electronic part's full performance can be accessed. It provides a maximum frequency of 710MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There should be 1.71V~3.63V provided with this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. A frequency synthesizer which is compatible with the CML, LVCMOS, LVDS, LVPECL logic levels is presented here. An electrical part such as this one can be classified as a Clock Jitter Attenuator component. Clock PLL is equipped with 36 pin count. Related electrical parts can be found for the base part number SI5316. The clock PLL has 36 pins that are available. There is a maximum supply voltage of 3.3V that clock generator can handle. A member of the DSPLL? series, this electronic component is made of plastic. It is ideally suitable for SONET;SDH based on its superior performance.

SI5316-C-GM Features


Available in the 36-VFQFN Exposed Pad
Supply voltage of 1.8V
Operating supply voltage of 3.3V

SI5316-C-GM Applications


There are a lot of Silicon Labs SI5316-C-GM Clock Generators applications.

  • Pagers
  • DVD add-on cards for multimedia PCs
  • Threshold extension
  • PMR (Professional Mobile Radio)
  • Automatic control system test
  • Walkie-talkies
  • Bluetooth transmitters
  • Frequency shifting decodes
  • Melting
  • Radio receivers

Write a review

Note: HTML is not translated!
    Bad           Good