SI5326B-C-GMR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | DSPLL® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 36 |
| Type | Clock Multiplier, Jitter Attenuator |
| Voltage - Supply | 1.71V~3.63V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI5326 |
| Output | CML, LVCMOS, LVDS, LVPECL |
| Pin Count | 36 |
| Number of Outputs | 2 |
| Number of Circuits | 1 |
| Frequency (Max) | 808MHz |
| Input | LVCMOS, LVDS, LVPECL, Crystal |
| Ratio - Input:Output | 3:2 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Height Seated (Max) | 0.9mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
SI5326B-C-GMR Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. Embedded in the 36-VFQFN Exposed Pad package is this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 36 terminations. It is designed that the Clock PLL's input should be LVCMOS, LVDS, LVPECL, Crystal. It is possible to access the full performance of the electrical part by implementing 1 circuits. This clock-based frequency generator provides a frequency up to 808MHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL works with 1.71V~3.63V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with CML, LVCMOS, LVDS, LVPECL logic levels. This is an electronic part that can be classified as a Clock Multiplier, Jitter Attenuator in this case. The clock-generating IC is a 36-bit device designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number SI5326. There is a 36 pin that is available on the frequency synthesizers. This clock generator is a member of DSPLL? series. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs.
SI5326B-C-GMR Features
Available in the 36-VFQFN Exposed Pad
SI5326B-C-GMR Applications
There are a lot of Silicon Labs SI5326B-C-GMR Clock Generators applications.
- Clock synchronization
- Microwave radio
- High-speed optical transport network (OTN)
- Test and instrumentation equipment
- VSAT (Small Ground Satellite Station)
- CPUs
- Skew suppression
- Multiplexing communication
- FMCW Radar
- HDD recorders
