SI5356A-B-GM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1997 |
| Series | MultiSynth™ |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Gold (Au) - with Nickel (Ni) barrier |
| Additional Feature | CAN ALSO OPERATES AT 2.5V AND 3.3V SUPPLY, 25MHZ CRYSTAL FREQ |
| Voltage - Supply | 1.71V~3.63V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI5356 |
| Output | LVCMOS |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 45mA |
| Max Supply Current | 60mA |
| Input | CMOS, Crystal |
| Ratio - Input:Output | 3:8 |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Max Duty Cycle | 60 % |
| Divider/Multiplier | Yes/No |
| Height | 850μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
SI5356A-B-GM Overview
Clock generator is packaged in the way of Tray. Embedded in the 24-VFQFN Exposed Pad package is this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 24 terminations to be found. The clock generator ic should be grounded with a voltage of 1.8V. This Clock PLL will be fed by CMOS, Crystal as its input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There are 1.71V~3.63V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. LVCMOS logic levels are supported by this RF synthesizer. It is possible to classify this electronic component as a Clock Generator. According to the base part number, its related parts can be founded. There are 24 pins on the frequency generators that are available for use. There is a maximum supply voltage of 3.3V that clock generator can handle. CAN ALSO OPERATES AT 2.5V AND 3.3V SUPPLY, 25MHZ CRYSTAL FREQ is included in this frequency generator to enhance clock signal output. There is an electronic part in this series that belongs to the MultiSynth? family. The output frequency can be amplified as high as possible with its 8 signal outputs. When operated at 200MHz, frequency synthesizer achieves high efficiency. For the time clock generator to operate properly, 45mA of supply current are required. It is possible to supply up to 60mA of current for this clock generator operation.
SI5356A-B-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Operating supply voltage of 3.3V
SI5356A-B-GM Applications
There are a lot of Silicon Labs SI5356A-B-GM Clock Generators applications.
- Cellular/4G
- Microprocessor clock multipliers
- Bluetooth transmitters
- Automatic test equipment
- Walkie-talkies
- Frequency synthesis
- Signal generator
- Laptops
- Wi-Fi routers
- 1 Gigabit Ethernet
