banner_page

SI5368C-C-GQR

3.3V Clock Multiplier, Jitter Attenuator 346MHz SI5368 Clock Generators DSPLL? Series 100 Pins 100-TQFP 100 Terminals Surface Mount 1.71V~3.63V Tape & Reel (TR)


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SI5368C-C-GQR
  • Package: 100-TQFP
  • Datasheet: PDF
  • Stock: 847
  • Description: 3.3V Clock Multiplier, Jitter Attenuator 346MHz SI5368 Clock Generators DSPLL? Series 100 Pins 100-TQFP 100 Terminals Surface Mount 1.71V~3.63V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 100-TQFP
Surface Mount YES
Number of Pins 100
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 1997
Series DSPLL®
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Type Clock Multiplier, Jitter Attenuator
Applications SONET;SDH
Voltage - Supply 1.71V~3.63V
Terminal Position QUAD
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Base Part Number SI5368
Output CML, LVCMOS, LVDS, LVPECL
Pin Count 100
Number of Outputs 5
Number of Circuits 1
Frequency (Max) 346MHz
Input Clock
Ratio - Input:Output 4:5
PLL Yes
Differential - Input:Output Yes/Yes
Divider/Multiplier No/Yes
Radiation Hardening No
RoHS Status RoHS Compliant

SI5368C-C-GQR Overview


As a clock IC, it is packaged by the Tape & Reel (TR) method. In the 100-TQFP package, there is an embedded clock generator. There are 100 terminations found in this file. This time clock generator should be voltaged at 3.3V. Clock is designed for clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 346MHz Max can be achieved with this clock-based frequency synthesizer. This component can be conveniently installed on the panel thanks to the Surface Mount. This clock PLL works with a supply voltage of 1.71V~3.63V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the CML, LVCMOS, LVDS, LVPECL logic levels is presented here. It is possible to classify this electronic component as a Clock Multiplier, Jitter Attenuator. It is a 100-bit IC that is designed for microprocessors specifically. According to the base part number, its related parts can be founded. The frequency generator is equipped with 100 pins. An electronic part belonging to the DSPLL? series is being used here. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. There is no limit to the number of applications for the frequency generators.

SI5368C-C-GQR Features


Available in the 100-TQFP
Supply voltage of 3.3V

SI5368C-C-GQR Applications


There are a lot of Silicon Labs SI5368C-C-GQR Clock Generators applications.

  • Laptops
  • Pagers
  • Small signal recovery
  • Digital circuits
  • Signal frequency synthesis circuits
  • Coherent carrier tracking
  • Wide area power system
  • VSAT (Small Ground Satellite Station)
  • Microwave radio
  • Wireless infrastructure

Write a review

Note: HTML is not translated!
    Bad           Good