banner_page

SI5375B-A-GL

1.8V Clock Generator, Jitter Attenuator SI5375 Clock Generators DSPLL? Series 80 Pins 80-LBGA 80 Terminals Surface Mount 1.71V~2.75V Tray


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-SI5375B-A-GL
  • Package: 80-LBGA
  • Datasheet: PDF
  • Stock: 488
  • Description: 1.8V Clock Generator, Jitter Attenuator SI5375 Clock Generators DSPLL? Series 80 Pins 80-LBGA 80 Terminals Surface Mount 1.71V~2.75V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 80-LBGA
Surface Mount YES
Number of Pins 80
Weight 50.008559mg
Operating Temperature -40°C~85°C
Packaging Tray
Published 1997
Series DSPLL®
JESD-609 Code e1
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 80
ECCN Code EAR99
Type Clock Generator, Jitter Attenuator
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Additional Feature CAN ALSO OPERATE AT 2.5V SUPPLY
Voltage - Supply 1.71V~2.75V
Terminal Position BOTTOM
Terminal Form BALL
Supply Voltage 1.8V
Frequency 808MHz
Base Part Number SI5375
Output CML, LVCMOS, LVDS, LVPECL
Pin Count 80
Number of Outputs 4
Number of Circuits 1
Nominal Supply Current 870mA
Input Clock
Ratio - Input:Output 4:4
Primary Clock/Crystal Frequency-Nom 710MHz
PLL Yes
Differential - Input:Output Yes/Yes
Radiation Hardening No
RoHS Status RoHS Compliant

SI5375B-A-GL Overview


The Tray method is used for packaging clock ICs. The 80-LBGA package includes this clock generator. It contains a total of 80 terminations within RF synthesizer. Basically, this time clock generator needs a voltage of 1.8V. This Clock PLL will be fed by Clock as its input. A total of 1 circuits are implemented to access the full performance of the electrical part. Because of the Surface Mount, clock PLL can be easily mounted on the panel. In terms of supply voltage, RF synthesizer works with 1.71V~2.75V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. CML, LVCMOS, LVDS, LVPECL is designed for clock generator's output. As far as this electronic part is concerned, it can be classified as a Clock Generator, Jitter Attenuator component. It is a 80-bit clock PLL designed specifically for microprocessors. These related electrical parts are available for the base part number SI5375. The clock PLL has 80 pins that are available. The RF synthesizer features CAN ALSO OPERATE AT 2.5V SUPPLY for improved clock signal output. DSPLL? series electronic parts are used in this part. 4 signal outputs are provided for enhancing output frequency as much as possible. By operating at a frequency of 808MHz, frequency generator is able to achieve high efficiency.

SI5375B-A-GL Features


Available in the 80-LBGA
Supply voltage of 1.8V

SI5375B-A-GL Applications


There are a lot of Silicon Labs SI5375B-A-GL Clock Generators applications.

  • 1 Gigabit Ethernet
  • Automatic test equipment
  • 10 Gigabit Ethernet
  • Motor speed controls
  • Frequency synthesis
  • Melting
  • Integrated phase noise in aerospace systems
  • Remote telemetry and instrumentation
  • Digital HDTV systems
  • Telecommunication systems

Write a review

Note: HTML is not translated!
    Bad           Good