SI9111DY-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 338.011364mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9111 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 9.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~13.5V |
| Control Features | Enable, Reset |
| Topology | Cuk, Flyback, Forward Converter, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 40kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 3MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SI9111DY-E3 Overview
It comes in the 14-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 9.5V~13.5V voltage are supplied and operated. Worked in an dc switcher with a -40°C~85°C TA rating. It can switch at 40kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. Enable, Reset is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. Different dc switching's functions can be applied to 14 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. Other relevant dc to dc converter ics can be found by searching "SI9111". There are 14 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. DC regulator outputs 9.7V voltage based on test statistics. You should note that the dc dc regulator's usual output current is 10mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator's maximum frequency is 3MHz.
SI9111DY-E3 Features
Transistor Driver Outputs
Switching Frequency: 40kHz~1MHz
Enable, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
SI9111DY-E3 Applications
There are a lot of Vishay Siliconix SI9111DY-E3 DC to DC converter applications.
- Laboratories
- Injection molding machinery
- Emergency lighting monitoring equipment
- Servo drive system
- Sink circuits
- Cutting machine tools
- Computer rooms
- Printing
- Program control systems
- Solar power plants
