SI9112DY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 338.011364mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9112 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 8.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Voltage | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 9V~13.5V |
| Control Features | Enable, Reset |
| Topology | Cuk, Flyback, Forward Converter, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 40kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 3MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SI9112DY-T1-E3 Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. A 9V~13.5V voltage is supplied to the dc control and used for operating it. A -40°C~85°C TA dc switcher is not a problem. Switching can be done at 40kHz~1MHz with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. Enable, Reset is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 14 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "SI9112". 14 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 8.7V voltage based on test statistics. In most cases, the dc dc regulator's output current is 10mA. This information should be noted when you begin working with the component. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator3MHz has the maximum frequency.
SI9112DY-T1-E3 Features
Transistor Driver Outputs
Switching Frequency: 40kHz~1MHz
Enable, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
SI9112DY-T1-E3 Applications
There are a lot of Vishay Siliconix SI9112DY-T1-E3 DC to DC converter applications.
- Printing equipment
- seismic instrument power circuits
- Pipe bending machines
- Medical monitoring systems
- Industrial robots
- Industrial controllers
- Geothermal power
- Handheld GPS
- Post equipment
- Program control systems
