SI9114ADY-E3
| Parameters | |
|---|---|
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~16.5V |
| Control Features | Enable, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 20kHz~2MHz |
| Input Voltage (Max) | 200V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Max Duty Cycle | 50 % |
| Clock Sync | Yes |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 240.999296mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9114 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
SI9114ADY-E3 Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. Packaging for the pmic consists of Bulk solid enclosures. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 9.5V~16.5V. Work well in dc switchers with a -40°C~85°C TA. This switching controller can switch at 20kHz~2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 14. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 48V volts. A search for "SI9114" will reveal other relevant dc to dc converter ics. 14 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 10V voltage based on test statistics. Voltages 200V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 700mA, so note that when you start the project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulator has a maximum frequency of 2MHz. It runs on a supply current of 3mA.
SI9114ADY-E3 Features
Transistor Driver Outputs
Switching Frequency: 20kHz~2MHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
SI9114ADY-E3 Applications
There are a lot of Vishay Siliconix SI9114ADY-E3 DC to DC converter applications.
- Hydraulic presses
- Servo drive system
- Electric heating, lighting
- Solar power plants
- Computer rooms
- Overvoltage protection circuits in TV sets
- Telecommunications equipment
- Network technology
- Cutting machine tools
- Sink circuits
