SI9114ADY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 240.999296mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9114 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~16.5V |
| Max Supply Current | 3mA |
| Control Features | Enable, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 20kHz~2MHz |
| Input Voltage (Max) | 200V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Max Duty Cycle | 50 % |
| Clock Sync | Yes |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI9114ADY-T1-E3 Overview
With its 14-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 9.5V~16.5V volts and has 9.5V~16.5V supply voltage. A -40°C~85°C TA dc switcher is not a problem. This switching controller can switch at 20kHz~2MHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 14. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 48V volts. In addition to "SI9114", there are other relevant dc to dc converter ics you can find. In total, switching converter has 14 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 10V voltage. This dc to dc regulator accepts only 200V input voltage at most. You should note down the dc dc regulator's usual output current of 700mA when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 2MHz on this dc regulators. With a current supply of 3mA, it runs. There is a possibility that a current higher than 3mA will cause improper operation of the component and possibly damage switching voltage regulators.
SI9114ADY-T1-E3 Features
Transistor Driver Outputs
Switching Frequency: 20kHz~2MHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
SI9114ADY-T1-E3 Applications
There are a lot of Vishay Siliconix SI9114ADY-T1-E3 DC to DC converter applications.
- Communication system
- Large fire protection systems
- Hydraulic presses
- Digital video recorders
- Planers
- Bending machines
- Electric water heaters
- Hydrogen power
- Grinders
- Digital precision reference circuits
