SI9118DY-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9118 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 11.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16.5V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 40kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 80 % |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SI9118DY-E3 Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Bulk surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 10V~16.5V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 40kHz~1MHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. Search for "SI9118" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 11.5V. In most cases, the output current of the dc dc regulator will be 500mA, so note that when you start the project. A duty cycle set at 80 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 1MHz on this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 16.5V. There is 3mA supply current for it.
SI9118DY-E3 Features
Transistor Driver Outputs
Switching Frequency: 40kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
SI9118DY-E3 Applications
There are a lot of Vishay Siliconix SI9118DY-E3 DC to DC converter applications.
- Post equipment
- Printing
- Low output voltage switching power supply circuits
- Overvoltage protection circuits in TV sets
- Mobile phones
- ATMs
- Household control circuits
- Computer monitoring equipment of building
- Special machining machine tools
- Pipe bending machines
