SI9118DY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SI9118 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16.5V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 40kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Nominal Input Voltage | 200V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 80 % |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SI9118DY-T1-E3 Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). Voltages 10V~16.5V are the dc control's supply voltage and operating voltage, respectively. A -40°C~85°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 40kHz~1MHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 10V. Search for "SI9118" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Particularly, switching converter is a type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 300mV voltage. The dc dc regulator's usual output current is 10mA, which should be noted down when you start a project. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controller operates at a frequency of 1MHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 16.5V. 200V is the nominal working voltage. It runs on a supply current of 3mA.
SI9118DY-T1-E3 Features
Transistor Driver Outputs
Switching Frequency: 40kHz~1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
SI9118DY-T1-E3 Applications
There are a lot of Vishay Siliconix SI9118DY-T1-E3 DC to DC converter applications.
- Bending machines
- Production lines
- Shearing machines
- Digital video recorders
- Game consoles
- Domestic water pumps
- Access control systems
- Series voltage regulation circuits
- Medical monitoring systems
- Industrial controllers
