SI9120DJ-E3
| Parameters | |
|---|---|
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 750mW |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | SI9120 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 9.7V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.5mA |
| Power Dissipation | 750mW |
| Output Current | 125mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~13.5V |
| Input Voltage (Min) | 9.5V |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 40kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 75 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Drain to Source Resistance | 20Ohm |
| Output Isolation | Isolated |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI9120DJ-E3 Overview
In the 16-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.In Bulk case, the ac dc converter is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~85°C TA °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As a result, the switching frequency reaches 40kHz~1MHz .Within the range of 9.5V~13.5V supply voltage (Vcc/Vdd), it can be used.It has a total of 16 terminations.The ac/dc converter has 16 pins.In this ac-dc converter, there are 16 pins.There are no problem mounting the ac dc converters by Surface Mount, Through Hole .A similar acdc converter can be searched by using the SI9120 family.There are 1 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .We have set the output current to 125mA .There is 9.7V output voltage from this AC/DC converter.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.Here is the standard for REACH SVHC : Unknown .
SI9120DJ-E3 Features
Packaged with 16-DIP (0.300, 7.62mm)
Switching Frequency at 40kHz~1MHz
With 16 pins
Output Current at 125mA
SI9120DJ-E3 Applications
There are a lot of Vishay Siliconix SI9120DJ-E3 AC DC Converters applications.
- Small off-line low voltage power supplies
- Lighting controls
- Shaver Charger
- ATX/BTX Auxiliary Power
- Humidifier
- Battery chargers for cellular phones
- Power tools
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- MPS parts
- Utility meters
