SI9145BQ-T1-E3
| Parameters | |
|---|---|
| Input Voltage (Min) | 2.7V |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2kHz~2MHz |
| Input Voltage (Max) | 7V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Max Duty Cycle | 100 % |
| Clock Sync | No |
| Length | 5.075mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9145 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 2.6V |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 2.7V~7V |
| Control Features | Enable, Frequency Control, Soft Start |
SI9145BQ-T1-E3 Overview
This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 2.7V~7V. Qualified to work in an dc switcher with -25°C~85°C TA. Using this switching controller, it is possible to switch at 2kHz~2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. Other relevant dc to dc converter ics will be returned if you search "SI9145". Switching converter has a total of 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. The minimum input voltage of the dc dc voltage regulator should be 2.7V. The test statistics indicate that DC regulator outputs a voltage of 2.6V. It should be fully noted that the dc to dc regulator only accepts 7V input voltage at most. You should note down the dc dc regulator's usual output current of 200mA when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator2MHz has the maximum frequency.
SI9145BQ-T1-E3 Features
Transistor Driver Outputs
Switching Frequency: 2kHz~2MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
SI9145BQ-T1-E3 Applications
There are a lot of Vishay Siliconix SI9145BQ-T1-E3 DC to DC converter applications.
- ATMs
- PSRR circuits
- Access control systems
- Packaging
- Smoke exhaust equipment
- Smart grid
- Special machining machine tools
- Electric heating, lighting
- Refrigerators of central air conditioners
- Computer-related products
