SI9910DY-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Bulk |
| Published | 2014 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 700mW |
| Voltage - Supply | 10.8V~16.5V |
| Base Part Number | SI9910 |
| Number of Outputs | 1 |
| Max Output Current | 1A |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 500μA |
| Power Dissipation | 700mW |
| Max Supply Current | 500μA |
| Propagation Delay | 135 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 135 ns |
| Rise Time | 50ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 50ns 35ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Voltage - Max (Bootstrap) | 500V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI9910DY-E3 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Bulk.The configuration is supported by 1 drivers.Gate drivers is mounted in the way of Surface Mount.In the absence of a 10.8V~16.5V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.There are numerous related parts listed under its base part number SI9910.The device is mounted with Surface Mount.At the time of design, it is configured with 8 pins.As a maximum, there is 1A limit to the output current.There can be a voltage up to 500V on the high-side (Bootstrap).Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.There is a maximum operating temperature of 85°C.Temperatures below -40°C are allowed as the minimum.Its maximum power dissipation of 700mW also demonstrates its maximum ability to transfer power without overheating.To maintain higher stability, the supply current should always be 500μA.In order for the device to operate, the supply voltage must be 16.5V.For operation, 10.8V is the minimum supply voltage.The power supply voltage for this device is set to 500μA.
SI9910DY-E3 Features
Embedded in the Bulk package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 500V
Maximum power dissipation of 700mW
SI9910DY-E3 Applications
There are a lot of Vishay Siliconix SI9910DY-E3 gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Broadcast equipment
- Motor Control
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High power buffers
- Power factor correction (PFC) circuits
- AC-DC Inverters
- UPS systems
