SI9976DY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 1W |
| Voltage - Supply | 4.5V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9976 |
| Pin Count | 14 |
| Max Output Current | 500mA |
| Operating Supply Current | 10μA |
| Power Dissipation | 1W |
| Output Current | 500mA |
| Max Supply Current | 10μA |
| Propagation Delay | 500 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Rise Time | 110ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 110ns 50ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| High Side Voltage - Max (Bootstrap) | 40V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
SI9976DY-T1-E3 Overview
For greater flexibility, the 14-SOIC (0.154, 3.90mm Width) package is adopted.The packaging method is indicated by Tape & Reel (TR).The configuration is supported by 2 drivers.Surface Mount is the way in which it is mounted.By using 4.5V~16.5V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~125°C TJ.The input type for this program is Non-Inverting.Initially, the configuration is composed of 14 terminations.There are numerous related parts listed under its base part number SI9976.In this case, Surface Mount indicates how the device is to be mounted.A total of 14 pins are available on the device.Mosfet driver is possible to achieve a maximum output current of 500mA.A board with 14 component pins is available.Ideally, the high-side voltage should not exceed 40V.The output current supported by the device is 500mA.Its maximum power dissipation of 1W shows its power loss capacity without overheating.To ensure high stability, the supply current should be kept at 10μA.A voltage of 10μA is used as the supply voltage.
SI9976DY-T1-E3 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 40V
Maximum power dissipation of 1W
SI9976DY-T1-E3 Applications
There are a lot of Vishay Siliconix SI9976DY-T1-E3 gate drivers applications.
- Motor controllers
- A/D drivers
- Commercial and agricultural vehicles (CAV)
- Smart Phones
- Digitally controlled power supplies
- PCMCIA applications
- Uninterruptible Power Supplies (UPS)
- White Goods - Air Conditioner, Washing Machine,
- Telecom switch mode power supplies
- Head-up and Head mounted displays
