SI9986CY-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Weight | 506.605978mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Bulk |
| Published | 2008 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 3.8V~13.2V |
| Base Part Number | SI9986 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Interface | Parallel |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 3.8V |
| Operating Supply Current | 2mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1A |
| Logic Function | AND |
| Input | CMOS |
| Voltage - Load | 3.8V~13.2V |
| Number of Drivers | 2 |
| Motor Type - AC, DC | Brushed DC, Voice Coil Motor |
| Motor Type - Stepper | Bipolar |
| Height | 1.5494mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI9986CY-E3 Overview
This package was designed with Bulkin mind.There is 8-SOIC (0.154, 3.90mm Width) case included with the part.The part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.3.8V~13.2V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of 0°C~150°C TJdegrees Celsius.This motor type can be categorized as Brushed DC, Voice Coil Motor.You can apply voltage at 3.8V~13.2Vto the load.The recommended mounting method is Surface Mount.Maintain a current of 1Afor the part output.Drivers controllers is based on the SI9986 part number.Drivers controllers is designed wDrivers controllersh 8 pins.The number of outputs available is [0].Maximum operating temperature is 70°C.Ideally, the operating temperature should be greater than 0°C.For its operation, a supply current of 2mAis used.With its maximum supply voltage of [0], it is capable of applying the device.This device can work with a voltage of 3.8Vas the minimal supply voltage.In this case, there are 2 drivers installed.
SI9986CY-E3 Features
Applications : General Purpose
Load voltage across the chip 3.8V~13.2V
base on SI9986 number
designed with 2 outputs
with 2 Drivers
SI9986CY-E3 Applications
There are a lot of Vishay Siliconix SI9986CY-E3 motor drivers applications.
- CHMSL (center high-mount stop lamps)
- Horticultural lighting
- Automotive exterior and interior lighting
- Telltale lights
- Display LED backlighting
- LCD displays
- drivers for outdoor application
- Scanning equipment
- Industrial high-bay lights
- High brightness LED lighting
