SI9987DY-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 3.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9987 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 10.68V |
| Max Output Current | 1.5A |
| Interface | Parallel |
| Operating Supply Current | 2.5mA |
| Output Configuration | Half Bridge (2) |
| Output Current per Channel | 1A |
| Input | CMOS |
| Voltage - Load | 3.8V~13.2V |
| Number of Drivers | 2 |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE SINK |
| Motor Type - AC, DC | Brushed DC, Voice Coil Motor |
| Motor Type - Stepper | Bipolar |
| Height | 1.5494mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI9987DY-T1-E3 Overview
The package is designed with [0].The part is packaged in a 8-SOIC (0.154, 3.90mm Width) case.Ideally, the part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.There is a possibility of providing 3.8V~13.2Vvolts through the device.There is a temperature range of -40°C~150°C TJin which this device operates.A motor of this type can be categorized as Brushed DC, Voice Coil Motor.This part provides 8terminations.You can apply voltage at 3.8V~13.2Vto the load.The amplifier should be set to 4.5V.Surface Mountis its recommended mounting method.Using the SI9987part number, it is located.8 pins are provided for its design.In this case, the output voltage is maintained at 10.68V.For optimal operation, its maximum output current reaches [0].In order to operate it, 2.5mAsupply current is used.Controller ic is equipped wController ich 2 drivers.
SI9987DY-T1-E3 Features
Applications : General Purpose
Load voltage across the chip 3.8V~13.2V
base on SI9987 number
with 2 Drivers
SI9987DY-T1-E3 Applications
There are a lot of Vishay Siliconix SI9987DY-T1-E3 motor drivers applications.
- LCD displays
- Building technology
- Home lighting systems
- Indicator
- Large outdoor LED display
- PWM generators
- Matrix LED dimmers
- Running preventive- maintenance diagnostics
- Mobile phone display backlight and key light driving
- Outdoor area lights
