SI9988DQ-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 157.991892mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 3.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SI9988 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 10.7V |
| Max Output Current | 1A |
| Interface | PWM |
| Operating Supply Current | 1.5mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 650mA |
| Logic Function | AND |
| Output Current per Channel | 670mA |
| Voltage - Load | 3.8V~13.2V |
| Built-in Protections | TRANSIENT |
| Motor Type - AC, DC | Brushed DC, Voice Coil Motor |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 1.2mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
SI9988DQ-T1-E3 Overview
The design contains a Tape & Reel (TR)package.The part is packged with 8-TSSOP (0.173, 4.40mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.This component is suitable for the component connected to General Purpose.3.8V~13.2V volts can be supplied by the device.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.There is a motor type Brushed DC, Voice Coil Motorassociated with this motor type.This part offers 8terminations.The voltage can applied to the load at the rate of 3.8V~13.2V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 4.5V.There is Surface Mount recommended mounting method for this device.Drivers controllers is recommended to keep the part output current at 650mA.Drivers controllers is based on the SI9988 part number.This device is designed with a pin count of 8.Currently, there are 4 outputs available.10.7Vis maintained as the output voltage.Its maximal output current reaches 1A to meet the operation requirements.Controller ic is powered by 1.5mAsupply current.
SI9988DQ-T1-E3 Features
Applications : General Purpose
Load voltage across the chip 3.8V~13.2V
base on SI9988 number
designed with 4 outputs
SI9988DQ-T1-E3 Applications
There are a lot of Vishay Siliconix SI9988DQ-T1-E3 motor drivers applications.
- CHMSL (center high-mount stop lamps)
- Street lights
- Scanning equipment
- Accurate LED current matching
- Alternative to HID lights
- Automotive applications
- Industrial high-bay lights
- LED bias
- Fog lamps
- Industrial lighting
