SIC769CD-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-PowerWFQFN Module |
| Number of Pins | 40 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Bootstrap Circuit, Diode Emulation, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Applications | Synchronous Buck Converters |
| Technology | DrMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIC769 |
| Pin Count | 40 |
| Number of Outputs | 1 |
| Output Voltage | 2V |
| Max Output Current | 35A |
| Operating Supply Voltage | 12V |
| Interface | PWM |
| Operating Supply Current | 400μA |
| Output Configuration | Half Bridge |
| Output Current | 30A |
| Output Current per Channel | 35A |
| Rise Time | 8ns |
| Drain to Source Voltage (Vdss) | 20V |
| Fall Time (Typ) | 8 ns |
| Voltage - Load | 3V~16V |
| Fault Protection | Over Temperature, Shoot-Through, UVLO |
| Number of Drivers | 2 |
| Rds On (Typ) | 1.7m Ω LS, 6m Ω HS |
| Drain to Source Resistance | 6MOhm |
| High Side Driver | YES |
| Turn Off Time | 0.03 μs |
| Load Type | Inductive |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIC769CD-T1-E3 Overview
To package H bridge, use Tape & Reel (TR).A cost-saving measure, H bridge is included in 40-PowerWFQFN Module.With the 4.5V~5.5V supply voltage, improved reliabilbridge drivery can be achieved.H bridge circuit is mounted in the way of Surface Mount.A normal operation of -40°C~150°C TJ is enabled by motor driver H bridges operating temperature.H bridge motor driver is pretty useful in a wide range of applications, including Synchronous Buck Converters.Mount the board using Surface Mount.As H bridge ic of its specific characteristics, it also possesses Bootstrap Circuit, Diode Emulation, Status Flag.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 40 termination.As H bridge ic of the signal interface, 40 pins are used as pronged contacts.Its base H bridge ic number, SIC769, can be used to locate other H bridge ics that are related.With a supply voltage of 12V, H bridge circuit operates.At a specified ambient temperature, 35A is the maximum load current that a power supply can provide.The power supply pins and the output pins are conducting a current of 30A.The 40 pins of this bridge driver work together to allow it to perform its specific functions.1 outputs are provided.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 12V.In this case, the voltage released by the Hbridge is 2V.Integrated 2 drivers are available.
SIC769CD-T1-E3 Features
Available in 40-PowerWFQFN Module Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : SIC769
Number of Receivers: 12V
SIC769CD-T1-E3 Applications
There are a lot of Vishay Siliconix SIC769CD-T1-E3 Full Bridge Drivers, Half-Bridge Drivers applications.
- V-Core
- Home Appliances
- Dual DC motor
- High-Performance Gaming Motherboards
- PC peripherals
- Voltage Regulators for CPUs
- Compact Blade Servers
- DVD players
- Notebook Computers
- Voltage Regulators for DDR memory arrays
