SIC779CD-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-PowerWFQFN Module |
| Number of Pins | 40 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Feature | Bootstrap Circuit, Diode Emulation, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Pure Matte Tin (Sn) |
| Applications | Synchronous Buck Converters |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 25W |
| Technology | DrMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SIC779 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Interface | PWM |
| Operating Supply Current | 600μA |
| Output Configuration | Half Bridge |
| Output Current | 40A |
| Output Current per Channel | 40A |
| Rise Time | 8ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 20 ns |
| Voltage - Load | 3V~16V |
| Fault Protection | Over Temperature, Shoot-Through, UVLO |
| Number of Drivers | 1 |
| Turn On Time | 0.03 μs |
| Supply Voltage1-Nom | 5V |
| High Side Driver | YES |
| Turn Off Time | 0.03 μs |
| Load Type | Inductive |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SIC779CD-T1-GE3 Overview
To package H bridge, use Tape & Reel (TR).H bridge is included in the 40-PowerWFQFN Module package as a cost-saving measure.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 4.5V~5.5V.H bridge circuit is mounted on Surface Mount.Motor driver H bridge works normally at -40°C~150°C TJ's operating temperature.Among H bridge motor drivers many applications are Synchronous Buck Converters.The board is mounted using Surface Mount.H gates specific characteristics also include Bootstrap Circuit, Diode Emulation, Status Flag.A transmission line can be terminated at a 40 termination with the H bridge whose characteristic impedance matches the transmission line.Signal interfaces use 40 pins as pronged contacts.The SIC779 base H bridge ic number is the key to finding more related H bridge ics.With a supply voltage of 12V, H bridge circuit operates.The output and power supply pins are flowing wH-bridgeh current 40A.It is the 40 pins that enable this bridge driver to perform its specific functions.H bridge motor drivers in the MOSFET Drivers subcategory have a number of similarities.A voltage of 5V is released by the Hbridge.Integrated 1 drivers are available.
SIC779CD-T1-GE3 Features
Available in 40-PowerWFQFN Module Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : SIC779
SIC779CD-T1-GE3 Applications
There are a lot of Vishay Siliconix SIC779CD-T1-GE3 Full Bridge Drivers, Half-Bridge Drivers applications.
- Quad DC motor
- Desktop Computers
- Optical disc drives
- Bipolar stepper motor
- Voltage Regulators for DDR memory arrays
- Industrial Fans
- Home Appliances
- Audio-visual equipment
- Telecom Microprocessor
- Non-V-Core
