SIP12501DMP-T1-E3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 6 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Frequency | 775kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3.3V |
| Input Voltage-Nom | 1.2V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 650mV |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Power Dissipation-Max | 1.1W |
| Power Dissipation | 1.1W |
| Voltage - Output | 5V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Number of Segments | 4 |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
SIP12501DMP-T1-E3 Overview
LED drivers designed using this technology use 1 outputs.775kHz is the frequency in which it operates.In order for it to operate, it has 6 terminations.To form its configuration, 6 pins are used.The number of segments is estimated to be 4.Surface Mount has been mounted with the device.3.3V is an acceptable maximum value for the supply voltage.The voltage output by it is 5V.6 pins are on the device.Furthermore, it can be classified as Switching Regulator or Controllers based on its characteristics.The system operates at a minimum supply voltage of 650mV in order to achieve maximum efficiency.For stable operation, it is recommended that the operating temperature not exceed 85°C.Stable operation requires a temperature greater than -40°C.Powering systems requires an internal voltage of 3.3V.Operation of the device requires 1.2V volts to be applied to the circuit.BATTERY CHARGE CONTROLLER IC is the analog component of this device.
SIP12501DMP-T1-E3 Features
Frequency of 775kHz
Operating with the supply voltage of 3.3V
SIP12501DMP-T1-E3 Applications
There are a lot of Vishay / Siliconix SIP12501DMP-T1-E3 LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Auxiliary lights for on-vehicle cameras
- Street lighting
- LED Lightings for Industrial Equipment
- Constant Voltage Power Source for portable equipment
- Replacement lamps
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
- Museum lighting
- High-end retail lighting
