SIP32102DB-T1-GE1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFBGA, CSPBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.096W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | On/Off |
| Current - Output (Max) | 7A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.3V~5.5V |
| Rds On (Typ) | 6.5m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 0.545mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP32102DB-T1-GE1 Overview
A Tape & Reel (TR) is used to package it.There is a 12-UFBGA, CSPBGA package that includes it.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There is a default setting of 1 for output.Operation is based on a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled features.It consists of 12 terminations in total.During operation, the 12 pins are used.The LED driving board has a total of 1 functions.There is a maximum output of 7AV from the LED driver.To comply with the operation criteria, the maximum output current is reduced to 5A.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way.The maximum supply voltage for this LED driver is 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.3V.
SIP32102DB-T1-GE1 Features
Supplied from 3.3V
SIP32102DB-T1-GE1 Applications
There are a lot of Vishay Siliconix SIP32102DB-T1-GE1 Power Switches ICs applications.
- USB Protection
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Storage Drives
- Solid-State Drives
- PDAs
- Portable GPS Device
- Hard Disk Drives
- Smart Phones, Feature Phones
- Portable Video Game Players
