SIP32103DB-T1-GE1
| Parameters | |
|---|---|
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | On/Off |
| Current - Output (Max) | 7A |
| Nominal Supply Current | 8.2μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.3V~5.5V |
| Rds On (Typ) | 6.5m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 0.545mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFBGA, CSPBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.096W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
SIP32103DB-T1-GE1 Overview
Tape & Reel (TR) is the way it's packaged.The 12-UFBGA, CSPBGA package contains it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts can be obtained with this LED driver.A lighting driver with Slew Rate Controlled features is available.It contains 12 terminations.The 12 pins are used to operate the LED driver.It has 1 functions.7AV is the maximum output of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this LED driving board.In this case, Vsup (maximum supply voltage) is set to 5.5V.Normal operation requires a voltage above 2.3V for the supply voltage.
SIP32103DB-T1-GE1 Features
Supplied from 3.3V
SIP32103DB-T1-GE1 Applications
There are a lot of Vishay Siliconix SIP32103DB-T1-GE1 Power Switches ICs applications.
- Hot Swaps
- Portable GPS
- PC Cards
- Handheld Devices
- USB Power Distribution
- Storage Drives
- Set-Top Boxes
- Wireless Headsets
- Wireless/Networking Cards
- Set-top-box
