Parameters |
Output Current |
2.4A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
3.8 ms |
Switch Type |
General Purpose |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
1 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.1V~5.5V |
Fault Protection |
Reverse Current |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
3800000ns |
Rds On (Typ) |
62m Ω |
Height |
600μm |
Length |
1.25mm |
Width |
1.65mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-UFDFN Exposed Pad |
Number of Pins |
4 |
Weight |
50.008559mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Digi-Reel® |
Published |
2013 |
Feature |
Slew Rate Controlled |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
Resistance |
72mOhm |
Power Rating |
324mW |
Max Power Dissipation |
324mW |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
0.5mm |
Base Part Number |
SIP3240*A |
Number of Outputs |
1 |
Output Type |
N-Channel |
Number of Channels |
1 |
Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
AUDIO/VIDEO SWITCH |
Current |
2.4A |
Output Configuration |
High Side |
Power Dissipation |
324mW |
SIP32401ADNP-T1GE4 Overview
It is package in Digi-Reel? case.This file is included in package 4-UFDFN Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.Slew Rate Controlled features are available on the lighting driver.There is a SIP3240*A family of things that it belongs to.A total of 4 terminations have been found in it.The 4 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.It is mounted in the way of Surface Mount.In this LED driving board, there is 72mOhm resistance.When this is the case, the output current is set to 2.4A.In this lighting driver, AUDIO/VIDEO SWITCH is the analog IC.To choose from, there are 1 channels.
SIP32401ADNP-T1GE4 Features
Resistance of 72mOhm
1 channels
SIP32401ADNP-T1GE4 Applications
There are a lot of Vishay Siliconix SIP32401ADNP-T1GE4 Power Switches ICs applications.
- HDD and SSD
- USB Ports/Hubs
- USB Power Distribution
- Telecom and Network Systems
- Hot Swap
- Solid-State Drives
- Wireless/Networking Cards
- Hard Disk Drives
- Handheld Devices
- Smartphone and PDA