SIP32402ADNP-T1GE4
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | SIP3240*A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.4A |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Current | 2.4A |
| Output Configuration | High Side |
| Power Dissipation | 324mW |
| Output Current | 2.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3.8 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 3800000ns |
| Rds On (Typ) | 62m Ω |
| Height | 600μm |
| Length | 1.25mm |
| Width | 1.65mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Digi-Reel® |
| Published | 2013 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Resistance | 72mOhm |
| Power Rating | 324mW |
| Max Power Dissipation | 324mW |
| Terminal Position | DUAL |
SIP32402ADNP-T1GE4 Overview
Digi-Reel? is the way it's packaged.It's included in the 4-UFDFN Exposed Pad package.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.It comes under the family of SIP3240*A.It consists of 4 terminations in total.It is necessary to use the 4 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 2.4A when operation criteria are met.It is positioned in the direction of Surface Mount.In this case, there is 72mOhm resistance in the LED driving board.The output current is set to 2.4A in this case.In this lighting driver, AUDIO/VIDEO SWITCH is the analog IC.We offer 1 channels in total.
SIP32402ADNP-T1GE4 Features
Resistance of 72mOhm
1 channels
SIP32402ADNP-T1GE4 Applications
There are a lot of Vishay Siliconix SIP32402ADNP-T1GE4 Power Switches ICs applications.
- Hot Swap
- Storage (HDDs, SSDs)
- Portable GPS
- USB Ports/Hubs
- Telecom and Network Systems
- HDD and SSD
- Solid-State Drives
- Wearable Devices
- PC Cards
- Smart Phones, Feature Phones
