SIP32409DNP-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Resistance | 52mOhm |
| Terminal Finish | Palladium/Gold (Pd/Au) - with Nickel (Ni) barrier |
| Max Power Dissipation | 735mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Power Dissipation | 735mW |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.8 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Switch-on Time-Max | 3800000ns |
| Rds On (Typ) | 44m Ω |
| Height Seated (Max) | 0.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP32409DNP-T1-GE4 Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 4-UFDFN Exposed Pad.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.By default, it is set to output 1.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.A total of 4 terminations have been recorded.The operation is carried out using the 4 pins.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 3.5A in order to meet the operation requirements.High efficiency is possible at 5V supply voltage.In this case, it is mounted in the way of Surface Mount.The LED driver has 52mOhm resistance.In this case, the output current will be set to 3.5A.The analog IC used in this lighting driver is SPST.In total, there are 1 channels available.
SIP32409DNP-T1-GE4 Features
Supplied from 5V
Resistance of 52mOhm
1 channels
SIP32409DNP-T1-GE4 Applications
There are a lot of Vishay Siliconix SIP32409DNP-T1-GE4 Power Switches ICs applications.
- Storage Drives
- PDAs
- Smart Phones, Feature Phones
- Hot-Swap Systems
- Gaming
- Portable Devices
- Hard Disk Drives
- Mobile Communication Devices
- USB Power Distribution
- Smartphone and PDA
