SIP32411DNP-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Resistance | 76mOhm |
| Max Power Dissipation | 324mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP32411 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Power Dissipation | 324mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 210 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Switch-on Time-Max | 220000ns |
| Rds On (Typ) | 62m Ω |
| Height Seated (Max) | 0.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SIP32411DNP-T1-GE4 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a 4-UFDFN Exposed Pad package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.It is a member of the SIP32411 family.A total of 4 terminations have been found in it.In order to operate, 4 pins are used.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 2A.High efficiency is possible at 5V supply voltage.Surface Mount is mounted in the way of this lighting driver.This LED driver is equipped with a total of 4 pins.76mOhm resistance is present in the lighting driver.The output current is set to 2A in this case.This gadget uses an analog IC, which is SPST in this case.To choose from, there are 1 channels.
SIP32411DNP-T1-GE4 Features
Supplied from 5V
Resistance of 76mOhm
1 channels
SIP32411DNP-T1-GE4 Applications
There are a lot of Vishay Siliconix SIP32411DNP-T1-GE4 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Solid State Drivers
- USB3.1 Power Delivery
- Portable GPS
- Wireless Modem Data Cards
- USB Power Distribution
- Portable Devices
- Portable/Handheld Devices
- PC Card Hot Swap
- Hot Swap
