SIP32411DR-T1-GE3
| Parameters | |
|---|---|
| Output Type | N-Channel |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Power Dissipation | 230mW |
| Output Current | 1.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 210 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~5.5V |
| Fault Protection | Reverse Current |
| Switch-on Time-Max | 220000ns |
| Rds On (Typ) | 101m Ω |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28.009329mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 230mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SIP32411 |
| Pin Count | 6 |
| Number of Outputs | 1 |
SIP32411DR-T1-GE3 Overview
The package is in the form of a Tape & Reel (TR).It is included with the 6-TSSOP, SC-88, SOT-363 package as well.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.The SIP32411 family contains this object.It contains 6 terminations.The 6 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 2A.Using a voltage of 5V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 6 pins.In this case, there is 120mOhm resistance in the LED driving board.This results in a 1.8A output current.This gadget uses an analog IC, which is SPST in this case.You can select from 1 channels.
SIP32411DR-T1-GE3 Features
Supplied from 5V
Resistance of 120mOhm
1 channels
SIP32411DR-T1-GE3 Applications
There are a lot of Vishay Siliconix SIP32411DR-T1-GE3 Power Switches ICs applications.
- PC Card Hot Swap
- USB Power Distribution
- Smart Phones, Feature Phones
- HDD and SSD
- HDD, SSD
- Wearable Devices
- Handheld Devices
- Hot-Swap Systems
- USB Protection
- PDAs
